Introduction / Product Package
4
E
NGL
IS
H
E
N
GL
IS
H
CAUTION!
Dangerous voltage. Danger of electrical shock. Some
parts of the device under test may not be insulated.
Continuous double or reinforced insulation complies
with category II DIN EN 61140.
CONFORMITY SYMBOL
The instrument complies with the valid directives. It
complies with the EMC Directive (2014/30/EU).
Standard EN 61326-1 is fulfilled. Meets the general
requirements of low voltage directive (2014/35/EU).
Tester
complies
with
the
WEEE
Directive
(2012/19/EU).
WARNING!
Failure to read the tester manual or to comply with the
warnings and references contained herein can result
in serious bodily injury or tester damage. The respec-
tive accident prevention regulations established by the
professional associations are to be strictly enforced at
all times.
Introduction / Product Package
The contactless voltage tester MD116 is developed for voltage
testing at insulated wires and cables. No direct contact to the
device under test (DUT) is required.
