Portable Aluminum Gantry Crane
Operation & Maintenance Instructions
Document No. TD005-0618
Last Updated: 21 June 2018
Page 3 of 12
IMPORTANT
Before assembly or operation of this gantry, please read these instructions carefully.
•
ENSURE
no parts are missing or damaged. A full list of required parts can be found on Page 10 of this
manual and a Pre-Build Check List is on Page 4
•
DO NOT
use to lift or support a person
•
CHECK
that the rated capacity is clearly marked on each side of the lifting beam
•
DO NOT
lift more that the rated capacity
•
DO NOT
adjust height whilst gantry is under load
•
DO NOT
push or pull unit with a forklift truck or other type of vehicle
•
DO NOT
allow the load to swing or roll against support members
•
SECURE
trolley and hoist in center of Beam when adjusting height
•
BEFORE LIFTING
ensure load is not attached to the floor, remove any obstacles that would
impede the lift
•
CARE
should be taken if it becomes necessary to move the gantry under load, we recommend that you
adhere to procedure for this operation, outlined in this manual
