Page 6
Reader Terminal Keypad Technical Manual
STEP 1:
Attach the external reader 6 pole flat cable from the
Reader Terminal Keypad to the connector on Barcode
Scanner electronics board.
DIP switch settings
#
description
#
description
1
DIP switch
2 Parameters request button
By changing the DIP Switch
pins position, different network address can be set. To change
between different pins positions, use a small flat headed screwdriver or similar object to push DIP
switch pins to desired position.
After each address change or after device’s first installation power off and back on the device (for the
new settings to take effect) and obtain operating parameters.
Operating parameters are obtained through the Metra NET Network. The server must be set up and
running for that purpose. To obtain operating parameters, press the PARAMETERS REQUEST
button.
NOTE
Network based functionality will be present only if the server is running and the Reader Terminal has
been properly configured.
