Page 12
Door Access Terminal Combo Technical Manual
DIP switch settings
#
description
1
DIP switch
2
Parameters request button
By changing the DIP Switch
pins position, different operating modes and device’s Metra NET
Network address can be set. To change between different pins positions, use a small flat headed
screwdriver or similar object to push DIP switch pins to desired position.
After each settings DIP switch position change power off and back on the device (for the new settings
to take effect).
Network address
After installation is complete, the device network address must be set by DIP switches.
NOTE
Each Metra device must have different address setting.
Switch
#1
must be set to OFF (switch down).
Look up the code for desired network address in the coding table. Set switches
#2 through #8
to
indicated positions, where:
0 indicates the corresponding switch is in OFF position (switch down)