background image

CAUTION: Metra recommends disconnecting the negative battery 

terminal before beginning any installation, unless the vehicle 

manufacturer recommends against so. Please check with your 

local Dealership for more information. All accessories, switches, 

climate controls panels, and especially air bag indicator lights 

must be connected before reconnecting the battery or cycling 

the ignition. Also, do not remove the factory radio with the key 

in the on position, or the vehicle running. It would be best to 

remove the key from the ignition and then wait a few seconds 

before removing the factory radio.

Installation instructions for part 99-9013HG

• A) 

Radio trim panel

 • B) Radio housing • C) Radio brackets • D) Pocket • E) (8) #8 x 3/8” Phillips screws

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS

 (sold separately)

Wiring Harness: • XSVI-9006-NAV    Antenna Adapter: • 40-EU56

• Panel removal tool • Phillips screwdriver
• Euro radio removal keys (2 sets)

Metra part number: 86-9001

TOOLS REQUIRED

Volkswagen Golf 2015-up

99-9013HG

A

E

D

C

B

 

 

 

 

 

•  ISO DIN radio provision with pocket

•  ISO DDIN radio provision

Painted high-gloss black

KIT FEATURES

Summary of Contents for 99-9013HG








Reviews: