4
Kit Assembly 99-8219
DIN radio provision with pocket
1.
Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2.
Slide the housing brackets onto the
side of the radio housing until the clips
engage.
Note: Brackets are marked
left and right.
(Figure A)
3.
Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs outward. (Figure B)
4.
Slide the aftermarket radio into the cage
and secure. (Figure C)
5.
Reassemble dash in reverse order
of disassembly.
(Figure A)
(Figure B)
(Figure C)
Summary of Contents for 99-8219
Page 6: ...Notes ...
Page 7: ...Notes ...
