Metra Electronics 99-8163, Installation Instructions Manual, Page: 8 / 16

1.800.221.0932
|
MetraOnline.com
8
It is highly advisable to read the following steps beforehand, to ensure a clear understanding of
what is to be expected. The following steps must be done in the order that they are numbered.
With the vehicle completely off:
1. Connect the 16-pin harness with stripped leads into port “B” in the touchscreen display.
2. Connect the 8163 harness to the wiring harnesses in the vehicle. Then insert the 8163
harness
into port “A” in the touchscreen display. But do not install this harness until exactly
before step 1 from the Programming section. This is a timed process.
3. Connect the 4-pin harness with yellow RCA jacks into port “C” in the touchscreen display.
4. Connect the airbag-indicator/hazard/passenger-seatbelt harness:
a.
Connect the harness to the 12-pin and 14-pin harnesses in the vehicle.
b. Connect the harness into the airbag/seatbelt indicator.
c.
Connect the harness into port “D” in the touchscreen display.
5.
Disregard port “E”, it will not be used in this application.
6. Port “F” is an update port for future firmware upgrades.
7. Locate the factory antenna connector in the dash and complete all necessary connections
to the radio. Use the
antenna adapter
provided to adapt the factory antenna connector to
the aftermarket radio.
A
B
C
E
F
D
INSTALLATION
Note: DO NOT CONNECT!