Metra Electronics 99-7607B Installation Instructions Manual Download Page 3

Page: 3 / 7

99-7607B DASH DISASSEMBLY

NISSAN 370Z 2009-UP

Continue on kit assembly.

Remove (5) Phillips screws securing
the a/c control to the factory radio
trim panel.

Remove (2) Phillips screws securing
the a/c module to the factory radio
bracket assembly.

Remove (2) Phillips screws from the
bottom of the large trim panel includ-
ing the a/c vents and pocket assem-
bly then unclip and remove the
panel.

(Figure D)

Remove (4) Phillips screws securing
the factory radio and a/c control.

(Figure E)

Summary of Contents for 99-7607B

Page 2: ...small shifter trim panel including the hazard switch Figure A Unclip and remove the large shifter trim panel Figure B NOTE MANUAL SHIFT MODELS The shift trim is one piece unsnap care fully and set aside 2 Continue on page 2 3 Remove 1 Phillips screws from each side panel on the center console at the bottom of the radio panel then unclip and remove the panels Figure C A B C ...

Page 3: ...adio trim panel 7 Remove 2 Phillips screws securing the a c module to the factory radio bracket assembly 4 Remove 2 Phillips screws from the bottom of the large trim panel includ ing the a c vents and pocket assem bly then unclip and remove the panel Figure D 5 Remove 4 Phillips screws securing the factory radio and a c control Figure E D E ...

Page 4: ...1 Secure the a c control into the 99 7607 radio housing using the factory hardware Figure A 2 Attach the included brackets to the a c module then secure it into the dash using the factory hardware Figure B PUSH A CV TE MP PUSH PUSH AUTO 5O 9O A B ...