Metra Electronics 99-7607B Installation Instructions Manual Download Page 2

Page: 2 / 7

99-7607B DASH DISASSEMBLY

NISSAN 370Z 2009-UP

isconnect the negative battery

terminal to prevent an accidental
short circuit.

AUTOMATIC SHIFT MODELS:

Unclip and remove the small shifter
trim panel including the hazard
switch.

(Figure A)

Unclip and remove the large shifter
trim panel.

(Figure B)

NOTE:

MANUAL SHIFT MODELS:
The shift trim is one piece, unsnap care-
fully and set aside.

Continue on page 2 .

Remove (1) Phillips screws from each
side panel on the center console at
the bottom of the radio panel then
unclip and remove the panels.

(Figure C)

Summary of Contents for 99-7607B

Page 2: ...small shifter trim panel including the hazard switch Figure A Unclip and remove the large shifter trim panel Figure B NOTE MANUAL SHIFT MODELS The shift trim is one piece unsnap care fully and set aside 2 Continue on page 2 3 Remove 1 Phillips screws from each side panel on the center console at the bottom of the radio panel then unclip and remove the panels Figure C A B C ...

Page 3: ...adio trim panel 7 Remove 2 Phillips screws securing the a c module to the factory radio bracket assembly 4 Remove 2 Phillips screws from the bottom of the large trim panel includ ing the a c vents and pocket assem bly then unclip and remove the panel Figure D 5 Remove 4 Phillips screws securing the factory radio and a c control Figure E D E ...

Page 4: ...1 Secure the a c control into the 99 7607 radio housing using the factory hardware Figure A 2 Attach the included brackets to the a c module then secure it into the dash using the factory hardware Figure B PUSH A CV TE MP PUSH PUSH AUTO 5O 9O A B ...