99-7516B KIT ASSEMBLY
3
ISO DIN HEAD UNIT PROVISION WITH POCKET
2
Mount the ISO Brackets to the head
unit with the screws supplied with
the unit.
(Figure A)
3
Snap the pocket into the bottom
opening of the radio housing.
(Figure B)
4
Slide the head unit into the radio
opening until the side clips engage.
(Figure C)
5
Snap the Trim plate into the Radio
Housing.
(Figure C)
6
Reassemble dash in reverse order of
disassembly.
*
Note: Refer also to the instructions included with the aftermarket radio.
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
1
B
C
A
Summary of Contents for 99-7516B
Page 7: ...99 7516B NOTES 5 ...
