REV. 4/30/2019 INST99-7390B
9
CONNECTIONS
From the 7390 harness to the aftermarket radio:
• Connect the
Black
wire, and also the
Black
wire from the AX-CAM6V, to the ground wire.
• Connect the
Yellow
wire to the battery wire.
• Connect the
Red
wire labeled “CAMERA POWER 6V” to the
Blue/Red
wire from the
AX-CAM6V.
• Connect the
Blue
wire to the power antenna wire.
• If the aftermarket radio has an illumination wire, connect the
Orange
wire to it.
The following (1) wire is only for a multimedia/navigation radio that requires this wire.
• Connect the
Blue/Pink
wire to the VSS/speed sense wire.
• Tape off and disregard the following (2) wires, they will not be used in this application:
•
Green/Purple, Light Green
• If retaining the factory AUX-In jack, connect the
Red
and
White
RCA jacks to the audio AUX-
IN jacks from the aftermarket radio.
• Connect the
Yellow
RCA jack to the backup camera input.
Continued on the next page
From the 16-pin harness with stripped leads to the aftermarket radio:
• Connect the
Red
wire to the accessory wire.
• Connect the
Blue/White
wire to the amp turn on wire. This wire must be connected to hear
sound from the factory amplifier.
• Connect the
Gray
wire to the right front positive speaker output.
• Connect the
Gray/Black
wire to the right front negative speaker output.
• Connect the
White
wire to the left front positive speaker output.
• Connect the
White/Black
wire to the left front negative speaker output.
The following (2) wires are only for multimedia/navigation radios that require these wires.
• Connect the
Green/Purple
wire to the reverse wire, and also to the
Blue/White
wire from
the AX-CAM6V (sold separately).
• Connect the
Light Green
wire to the parking brake wire.
• Tape off and disregard the following (7) wires, they will not be used in this application:
Blue/Pink, Brown, Green, Green/Black, Orange/White, Purple, Purple/Black
