REV. 4/30/2019 INST99-7390B
13
Changing radio type
If the L.E.D. flashes do not match the radio you have connected, you must manually program the
Axxess interface to tell it what radio it is connected to.
1.
After (3) seconds of turning the key on, press and hold the “Volume-Down” button on the
steering wheel until the L.E.D. in the Axxess interface goes solid.
2.
Release the “Volume-Down” button; the L.E.D. will go out indicating the Axxess interface is
in “Changing Radio Type” mode.
3.
Refer to the
Radio Legend
to know which radio number you would like to have programmed.
4.
Press and hold the “Volume-Up” button until the L.E.D. goes solid, and then release. Repeat
this step for the desired radio number you have selected.
5.
Once the desired radio number has been selected, press and hold the “Volume-Down”
button on the steering wheel until the L.E.D. goes solid. The L.E.D. will remain on for about
(3) seconds while it stores the new radio information.
6.
Once the L.E.D. goes out, the “Changing Radio Type” mode will then end. You can now test
the steering control wheel controls.
Note:
If at any time the user fails to press any button for a period longer than (10) seconds, this
process will abort.
Continued on the next page
Radio Number
Radio
1
Eclipse (type 1)
2
Kenwood
3
Clarion (type 1)
4
Sony / Dual
5
JVC
6
Pioneer / Jensen
7
Alpine
8
Visteon
9
Valor
Radio Number Radio
10
Clarion (type 2)
11
Metra OE
12
Eclipse (type 2)
13
LG
14
Parrot
15
XITE
16
Philips
17
TBA
18
JBL
Radio Legend
STEERING WHEEL CONTROL SETTINGS
(CONT.)
