99-6543HG
5
Axxess Interface Installation
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains safety chimes
• Retains the factory backup camera
• Retains the factory AUX-IN jack
• Retains balance and fade*
• Micro “B” USB updatable
* Non-amplified models only.
Note:
Does not support surround camera (360) switching.
INTERFACE FEATURES
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
TOOLS REQUIRED
• Axxess interface (built into the touchscreen display)
• 6543 harness
• 16-pin harness with stripped leads
• 4-pin harness with yellow RCA jacks
• Hazard harness
• Female 3.5mm connector with stripped leads
Connections to be made
..........................................................................6-8
Installing the interface
............................................................................... 9
Initializing the interface
............................................................................. 9
Final assembly
............................................................................................ 9
Touchscreen display operation
...........................................................10-12
Steering wheel control settings
..........................................................13-14
INTERFACE COMPONENTS
TABLE OF CONTENTS
Summary of Contents for 99-6543HG
Page 15: ...99 6543HG 15 ...