background image

99-6543HG

10

Touchscreen display operation

•  This is the climate control screen which will be displayed on the touchscreen display.  

This is considered the 

Main Menu

.

•  The upper left tab with (3) arrows will take you to the 

Heated/Cooled Seats*

 screen, 

Heated Steering*

 screen, 

Mirror Dimming*

 screen, and also to the screen where the 

“hard buttons” that were on the factory radio panel are now placed:  

ECO/ESC/PARK-SENSE/SPORT/STOP-START*

•  The upper right tab with a gear icon will take you to the 

Configuration Settings

 screen.

•  The climate controls will function in the same manner that they did with the factory 

climate controls.

•  For models with rear climate controls, the button labeled “REAR” will take you to the 

rear climate control menu.

* If applicable.

•  This is the 

Heated/Cooled Seats, Heated Steering

, and 

Mirror Dimming

 screen which 

will be displayed on the touchscreen display.

•  The upper left-middle tab with a home icon will take you back to the 

Main Menu

.

•  The upper right-middle tab with a gear icon will take you to the  

Configuration Settings

 screen.

•  The upper right tab with a car icon will take you to the screen where the “hard buttons” 

that were on the factory radio panel are now placed:   

ECO/ESC/PARK-SENSE/SPORT/STOP-START

 
 

Continued on the next page

Climate Control screen

Heated/Cooled seats screen

Summary of Contents for 99-6543HG

















Reviews: