99-5832G
3
Kit Assembly
Final Assembly
ISO DIN radio provision with pocket
1.
Attach the
to the
radio
brackets
using the (4) supplied
#8 x 3/8” Phillips truss head screws.
(Figure A)
2
. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
3.
Slide the radio into the completed
assembly and then secure it using
the screws supplied with the radio.
(Figure B)
Continue to final assembly
ISO DDIN radio provision
1.
Attach the
radio brackets
to the
radio using screws supplied with
the radio. (Figure C)
Continue to final assembly
(Figure A)
(Figure C)
(Figure A)
(Figure B)
1.
Cut the shaded portion from the
sub-dash of the vehicle to allow
the radio to fit. (Figure A)
2.
Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Test the radio for
proper operation.
3.
Secure the radio into the dash.
4.
Snap the
radio trim panel
over
the radio and then reassemble
the dash in reverse order of
disassembly.
Remove shaded area
