background image

C

Locate the factory wiring harness in 
the dash.  Metra recommends using 
the proper mating adapters from 
Metra and AXXESS to integrate your 
new radio.  Re-connect the negative 
battery terminal and test the unit for 
proper operation.

Cut and remove the center bar from 
the radio housing.  (Fig. A)

Snap the Double DIN brackets to the 
inside edge of the Double DIN trim 
plate.  (Fig. B)

Slide the Double DIN head unit or 
stacked ISO head units into the 
bracket/radio housing assembly and 
secure the Double DIN head unit 
or stacked ISO head units to the 
assembly using the screws supplied 
with the radio.  (Fig. C)

Snap the double DIN trim plate into 
the radio housing.

Plug the A/C harness into the car 
side of the climate control plug and 
the other side into the kit

Reassemble dash in reverse order 
of disassembly using the 99-5823CH 
radio trim panel instead of the fac-
tory radio trim panel.

99-5823CH KIT ASSEMBLY

1

2

3

4

5

6

7

A

B

FORD MUSTANG 2010-11

DDIN / STACKED ISO DIN 

HEAD UNIT PROVISION

99-5823CH

Changing The Display Back Light Color

Press the Passenger Heated Seat button for 10 seconds, the unit will go 

1. 

into “Confi gure Backlight Color” mode.  The display will show “Red Green 

Blue” with number assigned to each color contributing to the overall back 
light color while in this mode.  Each number will be between 0-255.
Press and hold the Fan + button to increase Red.

2. 

Press and hold the Fan - button to decrease Red.

3. 

Press and hold the Front Defrost button to increase Green.

4. 

Press and hold the Power button to decrease Green.

5. 

Press and hold the Rear Defrost button to increase Blue.

6. 

Press and hold the Driver Heated Seat button to decrease Blue.

7. 

After you choose your color stop pressing the buttons and after 10 

8. 

seconds the color chosen will stay.

Changing The Display Contrast

Press the Driver Heated Seat button for 10 seconds, the unit will go into 

1. 

“Confi gure Display Contrast” mode.  

Press the Temp +/- buttons to adjust the display contrast up and down. 

2. 

After 10 seconds of no buttons being pressed the chosen contrast will 

3. 

stay.

METRA ACCESSORIES

STEREO DASH KITS

Reviews: