Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapters from
Metra and AXXESS to integrate your
new radio. Re-connect the negative
battery terminal and test the unit for
proper operation.
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs down.
(Fig. A)
Snap the pocket into the bottom
opening of the radio housing.
(Fig. B)
Slide the aftermarket head unit into
the cage and secure. (Fig. B)
Plug the A/C harness into the car
side of the climate control plug and
the other side into the kit
Reassemble dash in reverse order
of disassembly using the 99-5823CH
radio trim panel instead of the factory
radio trim panel.
99-5823CH KIT ASSEMBLY
1
2
3
4
5
6
FORD MUSTANG 2010-11
DIN HEAD UNIT PROVISION
A
B
