Metra Electronics 95-9616B, Installation Instructions Manual

Page: 9 / 12

REV. 4/13/2021 INST95-9616B
9
USER GUIDE
( CONT.)
Infodapter Menu
Press and hold Button 1 to enter the
Infodapter menu and navigate through the
various options and settings:
Preferences
-> Camera Connected (None/Generic/OEM)
Choose the style of camera connected to the
vehicle (if applicable)
-> *Camera Active (OEM/Reverse)
Choose if the camera image appears on the
display at times triggered by the Porsche
system, or only when reverse gear is active
-> *RVC Grid Lines (Yes/No)
Rear view camera guidelines on/off
-> **Reverse Priority (Park Assist/Camera)
Choose if the display shows the parking
graphics or reversing camera image on
screen. Note – this can also be changed
instantly via the steering wheel controls for
faster switching. See “In Parking Mode (when
camera is active) for more information.
-> **Camera Delay (0 -> 20)
Increase camera delay to prevent ‘rolling’
effect on screen when switching between
video inputs
-> Diamond Short Press (None/SRC/TRK+/
TRK-/DSK+/DSK-)
Select short press function for the Diamond
button on the steering wheel controls
-> Diamond Long Press (None/SRC/TRK+/
TRK-/DSK+/DSK-)
Select long press function for the Diamond
button on the steering wheel controls
-> Park Brake Source (PRNDM/Speed/
Brake/Always On)
Set Park Brake output to activate when park
brake is on (Brake), when speed is less than
2mph (Speed), when gear shifter is set to
‘Park’ (PRNDM) or to remain on at all times
(Always On)
-> Restore Factory Settings (Yes/No)
Select Yes to return all Infodapter settings to
factory defaults
Language
-> Select language (English/French/
German/etc)
Version
-> View software version screen
Continued on the next page