background image

386.257.1187   

|

   MetraOnline.com

4

KIT ASSEMBLY

AXXESS INTERFACE INSTALLATION

INTERFACE FEATURES

INTERFACE COMPONENTS

•  9616 interface
•  SWC interface
•  MOST-25

®

 amp interface

•  9616 harness (labeled LEAD 1458)
•  SWC harness (labeled LEAD 1214)
•  USB harness
•  3.5mm adapter
•  Antenna adapter

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun, solder, and heat shrink • Tape  
• Wire cutter • Zip ties

TABLE OF CONTENTS

Connections ................................................................................................................................... 5
Installation .................................................................................................................................... 6
Programming ................................................................................................................................ 6
User guide ................................................................................................................................ 8-10

•  Provides accessory power
•  Provides illumination, parking brake, reverse, and speed sense outputs
•  Retains audio controls on the steering wheel
•  Retains parking sensor audio
•  Retains parking sensor graphics †
•  Retains the factory backup camera
•  Retains the factory AUX-IN jack and USB port
•  Designed for models with a fiber-optic MOST-25

®

 amplifier• Retains balance

•  Retains balance
•  Micro-B USB updatable

† Through the backup camera input from the aftermarket radio

Summary of Contents for 95-9616B













Reviews: