10
Kit Assembly 95-5812
1.
For the Ford Freestar 2004-2007, Mercury
Monterey 2004-2007, Ford Focus 2005-2007,
and the Ford F Series Super Duty 2005-up
:
Do not cut the rear mounting tabs from the
double DIN brackets.
If your vehicle is not listed
above move to step 2.
2.
If your vehicle was not listed above, attach the
included spacers to the back of the radio housing
mounting tabs. Cut and remove the rear mounting
tabs. (Figure A)
3.
Attach the double DIN brackets to the radio
housing.
Note: The notch in the housing should
be on top.
(Figure A & B)
4.
Slide the double DIN radio into the radio housing/
bracket assembly and secure the radio to the
assembly using the screws supplied with the radio.
(Figure C)
5.
Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the
negative battery terminal and test the unit for
proper operation.
6.
Reassemble dash in reverse order of disassembly.
Double DIN radio provision
(Figure D)
(Figure C)
(Figure B)
(Figure A)
