Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
(1) screw located to the right of the ignition
switch. Remove (1) screw located above
the driver's side speaker. Carefully unsnap
the dash trim bezel (some force may be
required).
1
TOYOTA Corolla (sed/wag-lower dash) 1988-92
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
(2) Phillips screws from each side of the
console trim bezel. Remove (4) screws
securing the factory head unit and
disconnect the wiring.
1
TOYOTA Corolla (GTS/SR5) 1984-87
4
2
Remove the mounting brackets from the
factory head unit assembly. Align the holes
in the mounting brackets with the holes in the
Pocket.
Mount the factory mounting
brackets to the
with those screws
previously removed.
2
Remove the mounting brackets from the
factory head unit assembly. Align the holes
in the mounting brackets with the holes in the
Pocket.
Mount the factory mounting
brackets to the
with those screws
previously removed.
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
the climate control knobs, unsnap the upper
trim bezel and disconnect the hazard and
clock leads. Remove (2) screws from the
lower trim bezel and remove.
1
TOYOTA Corolla (coupe-lower dash) 1993-97
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
(4) screws from the top edge of the
instrument trim bezel and (2) screws below
the radio opening. Remove (1) screw from
the lower-left tab of the bezel ( to the right of
the a/c vent) and unsnap the bezel.
1
TOYOTA Corolla (sed/wag-upper dash) 1988-92
5
2
Remove the mounting brackets from the
factory head unit assembly. Align the holes
in the mounting brackets with the holes in the
Pocket.
Mount the factory mounting
brackets to the
with those screws
previously removed.
2
Remove the mounting brackets from the
factory head unit assembly. Align the holes
in the mounting brackets with the holes in the
Pocket.
Mount the factory mounting
brackets to the
with those screws
previously removed.
