Metra Electronics 88-00-8000, Installation Instructions

Page: 1 / 4

88-00-8000
AW-800PKUV
INSTALLATION
INSTRUCTIONS
APPLICATIONS
CAR PAGE
TOYOTA
4Runner 1984-88......................................................................... 1
4Runner 1989-95......................................................................... 1
4Runner 1996-99......................................................................... 2
Camry 1987-91............................................................................ 2
Celica (GT/GTS) 1986-89............................................................... 3
Celica 1990-93............................................................................. 3
Corolla (GTS/SR5) 1984-87........................................................... 4
Corolla (sedan/wagon-lower dash) 1988-92.................................. 4
Corolla (sedan/wagon-upper dash) 1988-92.................................. 5
Corolla (coupe-lower dash) 1993-97.............................................. 5
Corolla (coupe-upper dash) 1993-97............................................. 6
MR2 1991-94............................................................................... 6
Pickup 1984-88............................................................................ 7
Pickup 1989-91............................................................................ 7
Pickup 1992-95............................................................................ 8
Supra 1986-92............................................................................. 8
T100 1993-98.............................................................................. 9
Tacoma 1995-00........................................................................... 9
KIT FEATURES
Works with
factory brackets
or Metra's
99-8101
Fills space left
after removing
double-DIN unit
KIT COMPONENTS
TOOLS REQUIRED
Cutting tool
Phillips screwdriver
KIT FEATURES
Pocket
1-800-221-0932 www.metraonline.com
© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
the ashtray and (3) screws from the ashtray
bracket. Remove (1) screw from each side
of the dash console and unsnap the trim
bezel.
1
TOYOTA 4Runner 1984-88
2
Disconnect the negative battery terminal to
prevent an accidental short circuit. Remove
the driver's side speaker panel by removing
(3) screws and (1) 10mm bolt. Remove (1)
screw from the left side of the housing and
unsnap the ignition cover. Remove the
glove compartment assembly by removing
(1) 10mm bolt from the bottom of the
speaker panel and (3) screws from the right
side of the housing. Remove the remaining
(3) screws securing the radio trim bezel.
1
TOYOTA 4Runner 1989-95
1
Remove the mounting brackets from the
factory head unit assembly. Align the holes
in the mounting brackets with the holes in the
Pocket. Mount the factory mounting
brackets to the Pocket with those screws
previously removed.
2
Remove the mounting brackets from the
factory head unit assembly. Align the holes
in the mounting brackets with the holes in the
Pocket. Mount the factory mounting
brackets to the Pocket with those screws
previously removed.
USE THE FOLLOWING INSTRUCTIONS FOR APPLICATIONS USING
FACTORY BRACKETS. FOR APPLICATIONS USING METRA'S
99-
8101, USE THE INSTRUCTIONS PROVIDED WITH THAT KIT.