REV. 11/22/2019 INST108-TO4
5
KIT ASSEMBLY
Note:
For steps 1 and 2, reference the
installation manual provided with the radio
for which hardware to use. The display
screen and radio chassis use two different
types of screws.
1.
Secure the
radio brackets
to the radio
chassis using (4) screws supplied with
the radio. (Figure A)
2.
Secure the radio display to the
radio
brackets
using (4) screws supplied with
the radio. (Figure B)
3.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for proper
operation.
4.
Slide the completed assembly into the
dash, then secure using the factory screws.
5.
Snap the
radio trim panel
over the
completed assembly, then reassemble
the dash in reverse order of disassembly
to complete the installation.
(Figure A)
(Figure B)
(Figure B)
Summary of Contents for 108-TO4
Page 6: ...1 800 221 0932 MetraOnline com 6...
Page 7: ...REV 11 22 2019 INST108 TO4 7...
Page 14: ...1 800 221 0932 MetraOnline com 6...
Page 15: ...REV 11 22 2019 INST108 TO4 7...
