REV. 2/15/2022 INST107-KI2HG
7
4.
Connect the cable to the radio display,
place the
display trim panel
over the
display, and secure to the back panel
with (4) #4 x 3/8” screws provided.
(Figure G)
5.
Secure the
front panel
to the r
adio/
back panel assembly
using (6) #4 x 3/8”
screws provided. (Figure H)
6.
Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.
7.
Clip the radio assembly into to the dash,
then secure using the factory screws.
8.
Reassemble the dash in reverse
order of disassembly to complete the
installation.
KIT ASSEMBLY
(CONT.)
(Figure H)
(Figure G)
