386-257-1187
|
MetraOnline.com
4
KIT PREPARATION
From the factory control panel:
NON-NAV
1.
Unsnap the top trim panel from the
control panel. (above the screen)
(Figure A)
2.
Remove (4) screws and the factory
screen. (Figure B)
3.
Remove (6) screws to remove the
factory screen bezel. (Figure C)
Continued on the next page
From the factory control panel:
NAV models
1.
Remove (4) screws to remove the
factory screen bezel. (Figure A)
Continue to Step 4 on the next page
(Figure A)
(Figure A)
(Figure B)
(Figure C)
