386-257-1187
|
MetraOnline.com
2
1.
Using the panel removal tool, carefully
unclip and remove the trim panels
fromboth sides of the center console.
(Figure A)
2.
Remove (2) 9/32" screws located on
both sides of the padded trim to the
center console. Unclip and remove the
padded trim. (Figure B)
3.
Using the panel removal tool, gently
unsnap and remove the u-shaped trim
around the lower dash pocket. (Figure C)
(Figure D)
DASH DISASSEMBLY
Remove both sides
4.
Remove (2) 9/32" screws securing the
lower portion of the control panel.
(Figure D)
5.
Pull the pocket from the top to allow the
upper control panel to pass.
Continued on the next page
(Figure A)
(Figure B)
(Figure C)
