Metos WD-6E, Installation And Operation Manual

Page: 22 / 52

5HY
7URXEOHVKRRWLQJ
22
7URXEOHVKRRWLQJ
PROBLEM POSSIBLE CAUSE MEASURES
Appliance does not turn on Main switch is turned off Turn on the switch
Appliance does not take water Water valve is closed Open the valve
Rinse nozzles are blocked Clean the nozzles
Pressure switch is faulty Call the service
Wash result is not satisfactory Too short wash program compared to dirty-
ness Choose a longer program
Wash arms are blocked or arms do not rotate Unscrew arms and clean them and
nozzles.
Too much/little detergent Adjust
Too low tank temperature Call the service
Filter plates are dirty Clean
Tank water too dirty Change water
Dishes improperly placed Correct
Dishes are not dry Too little rinse aid Adjust
Dishes have been too long in the dishwasher Remove the dishes as soon as the
rinse cycle is finished
Rinse water is too cold Call the service
Streaks and spots on dishes Improper amount of rinse aid Adjust
Rinse water is too dirty Call the service
Rinse water too cold Call the service
Dishwasher stops during a wash
cycle Fuse blown Call the service
Other problem Call the service
Machine stops during a wash cy-
cle and starts taking water Tank empties Empty the tank, clean the bottom
and restart
Water in the tank is too hot Call the service
Pressure switch is not working Call the service
Overflow pipe has not been installed proper-
ly Install it properly
Dishwasher does not take rinse
aid Dispenser defective Call the service