Metos SP-30HA-W, Instruction Manual

Page: 9 / 36

15.05.2015
9
Metos Marine Mixer SP-30HA, SP-40HA
To close the bowl guard, rotating counterclockwise until the
bowl guard is in the locked position. (See Figure B)
NOTE: When the guard is open or not properly installed, the
mixer will not operate.
Fig. B
Removing and Attaching the Bowl Guard
NOTE: Before removing or attaching the bowl guard, make
sure the bowl is in the down/lower position and the agitator
is taking off the shaft.
To remove the bowl guard, push the upper and lower part
of the separated handle in different way (upper part – coun-
terclockwise, lower part – clockwise) and divide the handle.
(See figure C)
Fig.C
When the handle separated, hold the lower handle and con-
tinue turning the guard clockwise until the guard releases
from the ring catch on the mixer.
Fig.D
To reattach the bowl guard, line up the ring catch on the
left of the mixer; lift guard gently into place and rotate
the guard’s lower handle counterclockwise until it snaps
back into place with the upper part of the handle.
Controls
The Timer (C) is arranged to automatically stop the
machine after the selected interval. An untimed posi-
tion is provided for manually controlled mixing cycles.
Before starting the mixer it is necessary to set the
mixing duration or select the manual position – the
mixer will not operate in the 0 position.
Timed operation
For timed operation turn the Timer Knob (C) to the desired time (duration is marked
from 1 to 15 in graduations of one minute) and then press the Green Start Button (B)
to start the mixer. After the timed period you set, the mixer will stop automatically. If
it is necessary to stop the mixer before the end of the timed period, press the Red
Stop Button (A).