Metos PROVENO S 100, Installation And Operation Manual

Page: 15 / 68

2.11.2005 Rev. 1.5
Safety instructions
7
• When tilting the kettle, make sure there are no objects in the space between the ket-
tle and the pillars or that no objects can fall there when the kettle is being tilted.
• When tilting the kettle, make sure that nobody's fingers, hands or other parts of
their body are in danger of getting between the kettle and the pillars.
• Always check that the mixing tool has been locked in place before starting to mix.
• Always check that the scrapers have been properly attached to the mixing tool.
2.3.3 Other instructions for correct and safe use
• Stop the mixer before opening the lid either with the or button.
Stopping the mixer by opening the lid activates the emergency/stop function.
• Keep the cleaning jet tap closed when the jet is not used.
• The mixing tool is easier to position and remove from the kettle when the kettle is
in a tilted position (ergonomics).
• Protect yourself in an appropriate way when cleaning the kettle (follow safety and
handling instructions of the detergent).
• Do not use the kettle if its protective/cover plates are not properly in place.
• Observe the cleaning instructions. Avoid excessive use of water when cleaning the
control pillar.
Use of a high-pressure jet is prohibited. Disconnect the control
voltage of the kettle with the ON/OFF switch and with the mains switch before
cleaning the kettle.
1. ON/OFF switch
2. Mains switch
• Make sure before use that the removable lid is properly in place.
• Make sure before use that the safety grid is properly in place.
• Always open the lid to its extreme position and check the lid's secure before you
bend down over the kettle.
• Check the kettle's safety valve at regular intervals in the way explained in this man-
ual, and keep a record of regular checks.