18.9.2007
Rev. 2.4
Installation
8
5.5
Unpacking
Remove the cardboard packaging by cutting the straps that hold it in place; then slide it
off from the top.
Once you have removed the packaging, make sure that the automatic ice flake maker is in
perfectly good condition. If you are in any doubt, do not use it and contact immediately
the dealer who sold it to you.
Unscrew the screws that fasten the ice flake makers to the wooden pallet.
The appliance is provided with special threaded holes for attaching eyebolts. To reach
these holes, remove the upper panel by loosening off the fixing screws. Make sure to use
eyebolts with threads that match the internal threads of nuts welded on the frame.