background image

07.04.2015

Metos Induction range Ardox IE

4

2.  Safety

2.1.  Safe use of the appliance

Because the range is a heated appliance that has hot surfaces during normal use, the following warnings 

and instructions must be followed in order to avoid burns. 

The cooking zones are warmed up from the heat been transferred from cookware. 

For safe handling of cookware on the cooking top, always use heat protective gloves. 

To avoid overheating of cookware by means of evaporating of its content, do not leavecookware without 

supervision. 

Turn the control knob down to “0”position if cookware is taken away from cooking zone for a while. Do 

not place aluminium foil and plastic vessels on the hot hob surface. 

Metallic objects such as kitchen utensils, cutlery etc. shall not be placed on hob surfacewithin induction 

heating zones since they could get hot. 

Take care when operating induction heating source, as rings, watches and similar objects worn by user 

could get hot when in close proximity to the hob surface. 

Users with heart pacemakers should consult their doctor whether they are safe near induction range or 

not. 

2.2.    Safety instructions in case of malfunction 

If the surface of ceramic hob is cracked, immediately disconnect the appliance from the mains. 

2.3.  Disposal of he appliance 

The destroying of the appliance when its economical lifetime has been reached may beharmful to 

environment if not properly handled. Utilization of materials that are reusable is best done by professional 

personnel specialized in recycling. 

Summary of Contents for ARDOX IE





















Reviews: