background image

22.3.2010

 Rev.  3.0

Operation instructions

5

The range is controlled with power regulators and pilot lights.

Operating panel

1.

Pilot light, cooking zone on

2.

Power regulator, front zone

3.

Power regulator, rear zone

The ceramic range heats up very fast so no preheating is necessary. This feature also
makes it possible to switch off the cooking zone immediately when no longer needed. By
using the range in this way, energy is saved and a cooler working environment is
achieved. 

Select the cooking zone according to the pan. The power controls of the cooking zones
can be set between 1-6. The green pilot light also turns on. 

Start cooking on position 6 and when boiling starts decrease the power as needed. Despite
the fact that every cooking zone is fitted with a high temperature limiter the zones should
not be left on without pans for longer periods. If the set power of the cooking zone exceeds
the heat reception capability of the pan, the temperature limiter automatically adjusts the
power as needed. 

If there are longer interruptions in the electricity distribution, all power regulators of the
range should be set to the 0 position. This should be done in order to prevent unexpected
start-up of the range when the electricity distribution is restored.

The ceramic top of the range is very durable in normal usage. If, however, the ceramic top
due to an exceptionally strong pointed blow is cracked, use of the range is prohibited until
the ceramic top is exchanged.

Summary of Contents for Ardox C4


























Reviews: