Metos 74/02+2CTGG, Installation And Operation Manual

Page: 19 / 76

27.2.2004 Rev. 1.0
Operating instructions
11
4.2.2 Turning the open burners on and off
• To light the pilot flame, press the knob and turn it anti-clockwise to the position
shown as item 2 in Fig. 3;
• hold down the knob and at the same time place a flame next to the pilot burner;
• after lighting the pilot flame, hold down the knob for 15 more seconds to allow the
thermocouple to heat. If the pilot flame goes out when you release the knob, repeat
the operation;
• burner output can be controlled within a range between positions shown as item 3
and item 4 in Fig. 3;
• to turn off the main burner, turn the knob clockwise to the position shown as item
2 in Fig. 3;
• to turn off the pilot flame as well, turn the knob clockwise to the “OFF” position
as item 1, Fig. 3.
Fig. 3
1. "OFF" position
2. "PILOT FLAME LIGHTING" position
3. "HIGH" position
4. "LOW" position
4.2.3 Turning the solid top on and off
• To light the pilot flame, press the knob and turn it anti-clockwise to the position
shown as item 2 in Fig. 3;
• hold down the knob and at the same time push the ignition button (item 1 in Fig. 2);
• check pilot flame ignition through the inspection hole provided in the front panel
of the appliance;
• after lighting the pilot flame, hold down the knob for 15 more seconds to allow the
thermocouple to heat. If the pilot flame goes out when you release the knob, repeat
the operation;
• burner output can be controlled within a range between positions shown as item 3
and item 4 in Fig. 3 (range HIGH-LOW);
• to turn off the main burner, turn the knob clockwise to the position shown as item
2 in Fig. 3;
• to turn off the pilot flame as well, turn the knob clockwise to the “OFF” position
as item 1in Fig. 3.