Metos 4000996, Installation And Operation Manual, Page: 8 / 12

8
|
7.4.2021
Metos SW-III
ENGLISH
1. Introduction
• The SW-III series of weighing scale are ABS plastic housing and stainless steel platform.
• The SW-III series of weighing scales are super low power consumption.
• All the keypads are light touch switches and the displays are large easy to read liquid crystal type displays
(LCD).
• The LCD’s size is 25mm, the LCD’s without a backlight, this method is used for economize electric power.
• If user want to use, User select optional 15mm rear display.
• All units include zero, tare,check weighing function.
2. Key function
Zero
• Set the zero point for all subsequent weighing. Display shows zero.
Tare
• Tares the scale. Stores the current weight in memory as a tare value, subtracts the tare value from
the weight and shows the results. This is the net weight.
ON/OFF
• Turn on or turn off the power.
3. Operation
3.1. Power ON/OFF
• Switch on the scale by pressing ON/OFF . The display is switched on and the self test is started.
• If you want to switch off press the key again.
3.2. Zero
• Environmental conditions can lead to the balance exactly zero in spite of the pan not taking any strain.
However, you can set the display of your balance to zero any time by pressing ZERO key and therefore
ensure that the weighing starts at zero.
3.3. Tare
The weight of any container can be tared by pressing
TARE
button so that with subsequent weighing the
net weight of the object being weighed is always displayed.
• Load weight on the pan.
• Press
TARE
key. Zero is displayed, and tare is subtracted.
• Remove weight from the platform. Tared weight is displayed. It can set only one tare value. It can
display with a minus value.
• Press TARE key. Zero is displayed, tare weight is cleared.
3.4. Set Back Light
In the weighing mode, press and hold ZERO key. Display will be show “BK-AU”
Press TARE key to change display to
• BK- AU for to set back light turn on automatically
• BK- oF for to set back light turn off always