-6-
Setting up the Pr inter
Before setting up the printer you should first consider the following:
♦
Find a solid flat surface with adequate room for the printer. Make sure
there is enough room on the top side for the media and ribbon access.
♦
The location should be near the host or terminal. Consider the distance between host and printer for the communication cable
(serial or parallel cable)
♦
Clear the ground and isolate from other electrical cables for the power adapter.
Connecting the Power Cor d
1.
Leave the power switch at the ”
O
” position.
2.
Connect the power supply plug to the power jack and the other end to your AC source.
