3
BLUE’LOG EXPANSION (MX MODULES)
The blue’Log base device can be expanded to provide additional interfaces using
various expansion modules (MX modules). For installation information, see the
operating manual for blue’Log XM / XC or the instructions for the relevant MX
module at
https://www.meteocontrol.com/en/services/downloads/
in the section
“Photovoltaic Monitoring – Products”.
POWER SUPPLY
The current consumption of the blue’Log must be restricted by using an energy-
limited circuit. A DC source with limited power may also be used.
The power supply of the blue’Log must meet the following requirements:
Device protection
Voltage: 24 V DC | Current: 3.3 A
You will find details of device protection and further connection options in the
operating manual of blue’Log XM / XC.
ASSIGNMENT OF CONNECTIONS
The specific connection parameters of the devices to be installed (e.g. inverters,
energy meter, sensors) can be found in the “Compatibility list – blue’Log XM / XC”
and the manufacturer’s instructions for the relevant device.
Compatibility list
https://www.meteocontrol.com/service/downloads/
