ϳ
Setting the reminder alarm
Your meter has four reminder alarms. The meter will display
“OFF” and “ ”. If you don’t want to set an alarm, press
S
to
skip this step.
To set an alarm, press
M
to select “On”, then press
S
. With the
hour/minute flashing in sequence, press
M
to select the correct
hour/minute. Press
S
and go to the next alarm setting.
When the alarm beeps, you can press
M
to silence it or insert a test
strip to begin testing; if you ignore it, the meter will beep for 2
minutes then switch off.
Congratulations! You have completed all settings!
NOTE:
y
These parameters can
ONLY
be changed in the setting mode.
y
If the meter is idle for 3 minutes during the setting mode, it will
switch off automatically.
THE FOUR MEASURING MODES
The meter provides you with four modes for measuring, General, AC,
PC and QC. You can switch between each mode by:
Start with the meter switched off. Insert a test strip to turn on the
meter. The screen will display a flashing blood drop and “Gen”.
Press M button to switch between General, AC, PC and QC mode.
