10
Reassembly After Cleaning
Reassembling the sharpener
•
Ensure the screw at the rear is loose (about 10
turns). Reposition the sharpener and turn
screw until tight
Reassembling the slice deflector
•
Insert the slice deflector over pins and slide
back into position.
Reassembling the centre plate
•
Insert the centre plate over the knife and ensure
that the flutes are flush with the flutes on the
fence plate.
•
Insert the centre plate spindle completely and
rotate clockwise to secure.
Reassembling the table
•
Insert the table on the carriage
•
Tighten the table locking knob
•
Check that the table moves freely from left to
right
•
Check that the thickness selection knob works
correctly
