9
Disassembling the slice deflector
•
Remove the slice deflector by sliding it to the left
Disassembling the sharpener
•
Loosen the screw at the rear of the knife
sharpener without removing it (about 10 turns).
•
Then remove the sharpener by pulling it upwards
from the slicer.
Cleaning
•
Only use warm water and a mild detergent
to clean all parts, using a soft, spongy cloth
and nylon brush.
•
Do not use other metal products to scrape
or remove stubborn deposits of sliced
product.
•
Never leave any leftover product on the
slicer (Clean at least once a day).
•
DO NOT clean the unit, or any parts of the
unit in a dishwasher.
•
Rinse all parts after cleaning with clean water
and dry with a soft cloth.
•
Do not use abrasive cleaners, acids, steel wool
or high-pressure water jets which might
damage the machine.
•
Clean the machine body with a damp cloth or
sponge, rinsing frequently with hot water. Dry
carefully.
Cleaning the knife
•
To clean the knife whilst still on the machine,
use a damp cloth on the blade and move it
slowly from the centre outwards to the edge.
•
Dry the knife in the same way.
•
To clean the back knife guard, pass a damp cloth
between the blade and the back knife guard.
•
Clean the machine body with a damp cloth or
sponge, rinsing frequently with hot water. Dry
carefully.
