10
Reassembly After Cleaning
Reassembling the sharpener
•
Ensure the screw at the rear is loose (about
10 turns). Reposition the sharpener and
turn screw until tight
Reassembling the slice deflector
•
Insert the pin of the slice deflector in the
centre and rotate carefully returning it to its
original position.
Reassembling the centre plate
•
Insert the centre plate over the knife and
ensure that the square section joint is in its
proper place.
•
Insert the centre plate spindle completely and
rotate clockwise to secure.
Reassembling the table
•
Insert the table on the carriage
•
Tighten the table locking knob
•
Check that the table moves freely from left to
right
•
Check that the thickness selection knob works
correctly
