9
Disassembling the slice deflector
•
Rotate and lift the slice deflector as shown
below. It is not necessary to remove it, but it is
possible to extract it by pulling it towards you.
Disassembling the sharpener
•
Lift the sharpener cover.
•
Loosen the screw at the rear of the knife
sharpener without removing it (about 10
turns).
•
Then remove the sharpener by pulling it
upwards from the slicer.
Cleaning
•
Only use warm water and a mild detergent to
clean all parts, using a soft, spongy cloth and
nylon brush.
•
Do not use other metal products to scrape or
remove stubborn deposits of sliced product.
•
Never leave any leftover product on the slicer
(Clean at least once a day).
•
DO NOT clean the unit, or any parts of the unit
in a dishwasher.
•
Rinse all parts after cleaning with clean water
and dry with a soft cloth.
•
Do not use abrasive cleaners, acids, steel wool
or high-pressure water jets which might
damage the machine.
Cleaning the knife
•
To clean the knife whilst still on the machine,
use a damp cloth on the blade and move it
slowly from the centre outwards to the edge.
•
Dry the knife in the same way.
Cleaning the back knife guard
•
To clean the back knife guard, pass a damp cloth
between the blade and the back knife guard.
Cleaning the machine body
•
Clean the machine body with a damp cloth or
sponge, rinsing frequently with hot water. Dry
carefully.
