Notification Appliances—PA400 Electronic Mini-Sounders and PS12/24 Series Optional Strobes 3
Introduction
This document contains important information about installing and
operating the PA400 electronic mini-sounders and the PS12/24 series
optional strobes. These electronic mini-sounders and optional strobes are
manufactured by System Sensor for use with Johnson Controls systems.
If you install these electronic mini-sounders and optional strobes for
someone else to use, you must leave a copy of this document with the
user.
These instructions apply to Johnson Controls electronic mini-sounders and
optional strobes for mounting and wiring. Follow only those instructions
that apply to the model you are installing.
Before you install any electronic mini-sounders and optional strobes, read
and be familiar with:
●
applicable NFPA Standards, local codes, and the requirements of the
authority having jurisdiction.
●
or, for non-United States installations, applicable codes and standards
specific to the country and locality of installation.
Failure to follow these directions may result in failure of the device to
report an alarm or trouble condition. Johnson Controls is not responsible
for devices that have been improperly installed, tested, or maintained by
others.
Table 1: Models
Model Number
Description
Sounders
PA400R
PA400B
12 or 24 VDC, Red
12 or 24 VDC, Beige
Strobes
PS12LO
PS12LOB
12 VDC, 1.5 Candela, Red
12 VDC, 1.5 Candela, Beige
PS12M
PS12MB
12 VDC, 15 Candela, Red
12 VDC, 15 Candela, Beige
PS24LO
PS24LOB
24 VDC, 1.5 Candela, Red
24 VDC, 1.5 Candela, Beige
PS24M
PS24MB
24 VDC, 15 Candela, Red
24 VDC, 15 Candela, Beige
!
CAUTION: Equipment hazard. Do not use in potentially
explosive atmospheres. Do not leave unused
wires exposed.
General
Description
