4
EATON
IB519095EN
Installation instructions
Installation Instructions – RSRK
Optional EM and Sensor Mounting (steps 1-6)
1. EM UNIT - Install EM unit into existing fixture housing.
EM unit should be mounted so that there is sufficient
cable length to make all connections to LED driver
and EM test switch. Mount EM unit near the end of
the housing where the EM test switch will be located.
(Figure 7.)
Adapter
KO(s)
Accessory
Bracket
(EM/MS)
Sensor
Test Switch
Housing
Connector
Self-Tapping
Screws
Emergency
Battery Pack
(EL7/EL14)
Figure 7.
Figure 8.
2. Test Switch and/or Sensor (EM and MS) - Remove
appropriate KO(s) from hole size(s) needed
(Figure 8, 10) and Install Sensor and/or EM Test Switch
into hole, ensuring connector is accessible.
(Figure 9, 11.)
Connector
Test Switch
Sensor
Figure 9.
MS Connector
Test Switch
Test Switch
Mini Integrated
Sensor
KO(s)
Mini Integrated
Sensor
Accessory Bracket
(EM/MS)
MS Connector
Figure 10.
Figure 11.
