MetalTech I-CAISCGR Assembly Instructions Manual Download Page 2

OPERATIONAL SAFETY

METAL CONDUCTS ELECTRICITY:  

Do not use this equipment where contact may be made with power lines or other live electrical circuits.

FAILURE TO UNDERSTAND AND FOLLOW ALL SAFETY RULES AND ASSEMBLY INSTRUCTIONS 

COULD RESULT IN SERIOUS INJURY OR DEATH.

READ BEFORE BEGINNING ASSEMBLY.

All photos and drawings in this booklet are for reference purposes only. Refer to applicable OSHA, ANSI or CSA codes and regulations for the proper use of this equipment.

2

OPERATION AND SAFETY

    Do not use this equipment if you are in poor health, 

taking medications, drugs, or have been consuming 

alcohol, all of which may impair your ability to work 

safely on this product.

   Always use a scaffold in conformity with local  

or national legislation which applies.

   Never stack more than two units.
   Always use outriggers and guardrails when  

stacking units.

   Inspect before use. Do not use scaffold  

if damaged or parts are missing.

   Examine thoroughly to make sure unit is properly  

set up.

   Guardrails must be installed on all open sides  

of a work platform where a person could fall from  

a height of 6 ft (1.8 m) or more.

   Always fasten the guardrails system to the structure 

using toggle pins or bolts.

   Guardrails must be installed so that access door 

swings inward over platform.

   Always lock all access doors using door latches, even 

if the scaffold is in use or not.

   Securely lock all braces and platform before  

each use.

   There must be a minimum of two side braces 

installed on each scaffold level and evenly spaced 

throughout the scaffold. Lack of adequate bracing 

could cause scaffold to collapse.

   Always use outriggers secured to the structure  

with the locking pins.

   Always use casters locked to the structure  

with the locking pins.

   Do not climb unless all casters are in locked position.

    Erect to be plumb on firm and level surface.
   Must be used on a firm surface that is free of pits, 

debris, holes or obstructions.

   Never place anything under or attach anything  

to a scaffold to increase height or to adjust to uneven 

surfaces.

   Acids are corrosive and can seriously affect  

strength. Do not expose to corrosive substances.

   Keep scaffold free of debris and unnecessary 

equipment.  

     Always keep body centered inside structure  

of scaffold.

   Remove or fasten all tools, material or equipment 

before moving. Use extra caution when moving  

to avoid tipping.

   Never try moving this scaffold while  

standing on it.

   Never move a scaffold with a worker within.
   Do not use powered devices to propel  

this scaffold. Use extra caution near operating 

machinery.

   Do not use if the surface is not firm and level.
   Do not use in inclement weather or high winds.
   Maintain a firm grip while climbing.
   Do not modify the scaffold or any of  

its components.

  Do not use the scaffold as a footbridge.
   Do not use this product with a distorted piece of 

aluminum. Do not try to fix or untwist a piece of 

aluminum. Distorted piece of aluminum must be 

removed and replaced before using this product.

Summary of Contents for I-CAISCGR













Reviews: