12
OPERATION MANUAL
q
Place the squaring stop Fig 3.3 into position
on the table top, securing into place with the
bolts supplied. Check that the square stop is
square to the blade.
Adjustment can be made by loosening the
bolts and moving the stop by the amount
allowed by the clearance of the holes.
q
Re tighten the screws.
F
ig
. 3.3
3.3 ATTACHING THE ACCESSORIES Cont.
F
ig
. 3.4
F
ig
. 3.5
ATTACHING THE REAR SAFETY FENCE
q
Unpack and attach the rear fence to the back of the machine with the bolts supplied.
(Fig.3.4)
q
Ensure that the sensors have been connected and set up. (Fig.3.5) (See “4.2 Safety Sensor
Alignment” on Page 15)
22/07/2019
Instructions Manual for SG-420 (S535)
12
