Intended Use
RBM E | Version 1.07
9
3
Intended Use
The RBM E plate rolling machine is used exclusively for the production of
round shaped parts such as pipes, cones, cylinders, etc. The material to be
bent must not exceed the maximum sheet thickness specified for the machine.
The machine may only be operated by a single person who has been in
-
structed in the use and maintenance of the machine.
Proper use also includes compliance with all information in this manual. Any
use beyond the intended use or otherwise is considered misuse.
Unauthorized modifications or alterations to the Bending Machine can invali
-
date the CE conformity of the Bending Machine and are prohibited. The com
-
pany Stürmer Maschinen GmbH assumes no liability for design and technical
changes to the bending machine.
The improper use of the bender and the disregard of the safety regulations or
the operating instructions exclude liability of the manufacturer for resulting da
-
mage to persons or objects and cause the warranty to expire!
3.1 Misue
If the intended use is observed, no reasonably foreseeable misuse is possible,
which could lead to dangerous situations with personal injury.
3.2 Residual risks
Even if all safety regulations are observed and the machine is used correctly,
there are still residual risks listed below:
- There is a risk of injury to the upper limbs (e.g., hands, fingers).
- Danger of falling workpieces
- During set-up and set-up work, it may be necessary to dismantle on-site
protective devices. This creates various residual risks and potential dan
-
gers that every operator must be aware of.
WARNING!
Dangers in case of unintended use!
Misuse of the machine can lead to dangerous situations.
- Only operate the bender in the power range specified in the
technical data.
- Never bypass or override the safety devices.
- Only operate the round bending machine in a technically
perfect condition.
