Commissioning
RBM E | Version 1.07
21
Standard operation
In order to be able to remove a bent workpiece from the machine, the lock of
the top roller must be released and the top roller must be removed from the
guide.
Fig. 14: Release lock of top roller
Step 1: Before starting the machine, check the locking of the top roller.
Step 2: Check the parallelism of the rollers with a gauge and spirit level.
Fig. 15: Check parallelism of rollers
Step 3: Turn on the main switch. The operating display lights up.
Step 4: Press the START button.
Step 5: Press the rollers with the pedals.
Step 6: Perform Bending.
Step 7: Stop the rollers after completing the bending process. Move the front
and rear rollers downwards.
Step 8: Loosen the lock of the upper roller, fold out the upper roller and remove
the workpiece. Use a crane to support the workpiece.
Step 9: Fold in the top roller and lock.
Step 10: Turn off the machine with the main switch.
DANGER
The unfolded top roller must not be overloaded by the work
-
piece. The workpiece must be supported by a crane.
