Disposal, Recycling of old equipment
GS 18 | Version 1.05
13
9
Disposal, Recycling of old equip-
ment
In your own interests and in the interests of the environ-
ment, please ensure that all components of the machine
are disposed of in the proper and approved way.
9.1 Decommission
Disused devices must be taken out of service immedi-
ately in order to avoid later misuse and endangering the
environment or people.
- Remove all environmentally hazardous operating fluids
from the old device.
- Disconnect the power cord.
- If necessary, dismantle the machine into manageable
and usable assemblies and components.
- Guide the machine components and operating materi-
als to the appropriate disposal routes.
9.2 Disposal of electrical equipment
Please note that electrical appliances contain a variety
of recyclable materials as well as environmentally harm-
ful components.
Make sure that these components are disposed of sep-
arately and properly. In case of doubt, please contact
your municipal waste disposal.
If necessary, the help of a specialized waste manage-
ment company can be used for the treatment.
9.3 Disposal of lubricants
Please pay attention to an environmentally friendly dis-
posal of the used coolants and lubricants. Observe the
disposal instructions of your municipal disposal compa-
nies. The disposal instructions for the lubricants used
are provided by the lubricant manufacturer. If neces-
sary, ask for the productspecific data sheets.
10 Spare parts
10.1 Ordering spare parts
The spare parts can be obtained from the dealer or di-
rectly from the manufacturer. The contact details are in
chapter 1.2 Customer Service.
When ordering spare parts, please use the spare parts
document accompanying the machine.
- Type of device
- Serial number
- Quantity
- Designation
- Required mode of dispatch (mail, freight, sea, air,
express)
- Address of dispatch
Spare part orders which do not include the above indi-
cations may not be taken into consideration. If the indi-
cations regarding the mode of dispatch are missing, the
product is dispatched at the discretion of the supplier.
Information on the device type, article number and year
of manufacture can be found on the type plate, which is
attached to the device.
ATTENTION!
For maintenance work, please contact your nearest
metalworking dealer. Please write down the follo-
wing information from the machine or the operating
instructions beforehand so that you can be helped in
the best possible way with your problem:
- Model of the machine,
- Serial number of the machine,
- Hydraulic data
- Exact error description
DANGER!
Risk of injury due to incorrect spare
parts!
The use of incorrect or faulty replacement parts can
be dangerous to the operator and cause damage
and malfunction.
- Only original spare parts from the manufacturer or
replacement parts approved by the manufacturer
must be used.
- In case of doubt, always contact the manufacturer.
Tips and recommendations
Using non-approved spare parts voids the manu-
facturer's warranty.
