v1.0 22052012
8
GB
2.4 The press must not be used when :
1. The operator has not read the Operator’s Manual.
2. The work to be done is not in agreement with the recommendations in this
3. Manual.
4. The press is not complete or has been repaired with non-original parts.
5. 4. The speci
fi
cations of the power supply do not conform to those stated on the motor plate.
6. The operator did not check press state, especially the state of hydraulic conduits, the supply cord, the
control panel and the emergency stop switch.
7. The direction valve seal has been removed or is damaged.
8. The power supply socket is not equipped with a protection circuit.
9. Bystanders are present in the immediate vicinity of the machine.
3 Installation
3.1 Transporting the press
This machine can be transported using a pallet truck. The use of a forklift truck is also permitted for transport,
as long as special care is taken. During transport, the working table must be placed in its lowest position, with
the oil tank mounted on the inside of the machine frame on the supporting brackets.
3.2 Environmental conditions for the installation
• Use the press only in clean, dry and dust-free rooms.
• Surrounding temperature: +5 to +50 °C.
• Humidity: max. 90%: not condensing.
• The press should be
fi
xed to the
fl
oor with bolts.
• Ensure that the machine is placed safely.
• Ensure that electrical cables and hydraulic hoses are kept away from the working area.
copyrighted
document
- all
rights
reserved
by
FBC
