13
®
EN
CAT210 - NLFRENES - v2.0 - 16072013
6 Troubleshooting
Problem
Cause
Remedy
Excessive dust in the cabinet
Exhaust vent plugged or air flow is
blocked.
Abrasive media worn.
Too much abrasive media inside
cabinet.
Loose air line or fitting connections.
Clean rear vent and keep vent away
from any wall.
Replace abrasive media.
Remove excess media.
Tighten fitting and make sure air lines
are secure.
Uneven blasting actions
Too much abrasive media inside
cabinet.
Moisture present inside the cabinet.
Remove excess media.
Check air line to make sure there is no
moisture in it.
Inadequate speed or inefficiency of
blast
Abrasive media worn.
Pressure too low.
Replace abrasive media.
Increase inlet pressure and make sure
control valve is fully opened.
Static electricity
Dry weather conditions.
Leave the item being cleaned on the
grating.
7 Parts list
